| 
 
 
 
  Not your question?
  Ask your question
  View similar questions
   
 Add your answer here.Check out some similar questions!
What is a heat clamp
 [ 1 Answers ]
 Shat is heat clamp call that can be use to braze with 
Looking for a decent clamp meter
 [ 7 Answers ]
 Hello, I'm looking to buy a decent clamp meter. In case I'm using the wrong term, here's a picture of what I'm referring to: http://www.globalspec.com/NpaPics/31/90923_031020041314_ExhibitPic.jpg The thing is, I'm kind of confused by all the choices out there. I'm looking to spend a maximum... 
How Many Romex Cables through one Clamp ?
 [ 6 Answers ]
 Hi There... So I installed my new 200 Amps main service panel. Now, I have 40 romex cables that will be connected inside the panel. However, the panel has only 7 cut outs for clamps on top and bottom. One is 2", 3 are 3/4" and 3 are 1/2". My question is: can I run romex cable in bundle... 
Riser clamp
 [ 2 Answers ]
 After reading a bunch of questions and answers on this forum, I think that I need to use a riser clamp. My problem is that I have been unable to find a riser clamp at the local home improvement stores. Do "riser clamps" have a different name? Or are they relatively uncommon (i.e. not stocked... 
Need flange clamp for old toilet
 [ 2 Answers ]
 I've got an old raised-tank toilet in the basement of a house I just bought. The bowl was clamped to the drain line coming up from the floor by a wire 2-piece clamp that tightened with 4 nuts. The clamp was totally rusted and one of the bolts broke off when I bumped it. I took a picture of the... View more questions Search 
 |