Ask Experts Questions for FREE Help !
Ask
    jasmarie1's Avatar
    jasmarie1 Posts: 57, Reputation: 0
    Junior Member
    		  
    #1

    Sep 10, 2011, 12:12 PM
    What is a heat clamp
    Shat is heat clamp call that can be use to braze with
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Sep 10, 2011, 06:43 PM
    Where I work at we call it a wet rag. Water on a rag-- wrap it around the area you don't want heat on. For geothermal loop lines they do make a clamp,its called a cold clamp used when you fuse pipe together.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Looking for a decent clamp meter [ 7 Answers ]

Hello, I'm looking to buy a decent clamp meter. In case I'm using the wrong term, here's a picture of what I'm referring to: http://www.globalspec.com/NpaPics/31/90923_031020041314_ExhibitPic.jpg The thing is, I'm kind of confused by all the choices out there. I'm looking to spend a maximum...

How Many Romex Cables through one Clamp ? [ 6 Answers ]

Hi There... So I installed my new 200 Amps main service panel. Now, I have 40 romex cables that will be connected inside the panel. However, the panel has only 7 cut outs for clamps on top and bottom. One is 2", 3 are 3/4" and 3 are 1/2". My question is: can I run romex cable in bundle...

Riser clamp [ 2 Answers ]

After reading a bunch of questions and answers on this forum, I think that I need to use a riser clamp. My problem is that I have been unable to find a riser clamp at the local home improvement stores. Do "riser clamps" have a different name? Or are they relatively uncommon (i.e. not stocked...

Calibrating clamp temp probe? [ 8 Answers ]

I have a UEI Multi meter and use a pipe clamp type temp sensor for Superheat and Subcooling... How can I make sure it is accurate? Would it be internal on my Electric meter or on the Clamp? I can't seem to find any info. I know reg temp sensor ice water would be good for 32*. Can I get the clamp...

Need flange clamp for old toilet [ 2 Answers ]

I've got an old raised-tank toilet in the basement of a house I just bought. The bowl was clamped to the drain line coming up from the floor by a wire 2-piece clamp that tightened with 4 nuts. The clamp was totally rusted and one of the bolts broke off when I bumped it. I took a picture of the...

View more questions Search