 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I just noticed that regardless of whether the FAN switch is in the AUTO or ON position, the fan is continuously running. It just started to do this, this past week, up until now it was fine, only running when the furnace kicked in. When I turn the SYSTEM switch from HEAT or COOL to OFF, it...
My furnace is not running. The induction fan was running contiuously and then I change the sensor for it and now it is doing noting. I have a concord furnace. I tried to jump the thermostat but nothing happened
My heater fan will not shut off. Pulled thermostat off the wall and fan continues to run. Any answers are gratefully appreciated. So, update: We pulled the red wire off thermostat, and fan still keeps running. The only way to shut it off is at the furnace itself. But that turns whole system...
I have a problem with my Kenmore power vent gas water heater: 40 Gal. Power Miser 8 and the model number is 409.737945. The problem is that the exhaust fan has been running continuously for two days, even the gas burner is off. I have checked the air pressure switch it seems okay. What else...
Please let me know if it is more efficient to have the blower fan on continuously rather than in the automatic position. If so, does it make a difference in heating mode or AC mode?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
