Ask Experts Questions for FREE Help !
Ask
    f3 teck's Avatar
    f3 teck Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2012, 07:24 PM
    Power venter troubleshooting vac swich tube pluging why
    System running at 85%eff draft 0 - 05 smoke 0 co2 11 temp 300f the swg power venter isswg-4hds the vac tube plugs after 65 days any ideas
    f3 teck's Avatar
    f3 teck Posts: 4, Reputation: 1
    New Member
    		  
    #2

    Nov 7, 2012, 07:13 AM
    The power venter damper was not set up when installed must be closed down some and ajt with co2 kit called the rep at field controls f3teck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Test Gas Furnace with BYPASS of Power Venter... [ 0 Answers ]

I have a teledyne gas furnace with a power venter... my pilot is lit but main burners aren't kicking on. I was thinking that my power venter isn't working properly and was thinking of doing a quick test with a bypass of the power venter. There are two wires to the gas valve that it attaches to, I...

Hunter fans troubleshooting power coming to the receiver, but no power coming out [ 1 Answers ]

I have a hunter ceiling fan with remote. There is power coming to the receiver, but no power going out

The Power Venter (aka Heat Inducer and Draft Inducer) will not start on Goodman. [ 8 Answers ]

FURNACE: Made by: Goodman Model #: GMPN080-4 THE POWER VENTER (this is what the Goodman manual calls it but other websites refer to this as the Heat or Draft Inducer): Made by: FASCO Industries 70219565 Type: U218 Volts: 115 RPM3400 Customer Part #: B2833001S

Swich between two circuts with one power leed [ 6 Answers ]

I would like to be able to switch between two circuts with one power leed. 12 volt circuit running two smal lamps. What I would like to do is have two lamps on one power leed using a common ground. Activate circuit one by turning on the switch and not have circuit two active. Switch circuts...

My Power Venter gives me problems [ 1 Answers ]

I have a sidewall power venter for my furnace instead of a chimney and each year I have times when the power venter does not come on, therefore the furnace does not come on. I have had people in to look at it and they recommend removing it since they claim it is not necessary for my particular...

View more questions Search