 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
320 electrical service
Connecting existing bunk house trailer with 200 amp meter combo panel and house also with 200 amp meter combo panel... with 320 meter box. Do the electric company's have blankouts for the 200 meter combo panels. This would save a lot of money and time if I can connect into existing combo panels.
|
||||
|
||||
|
If I am correct, sounds like you have a meter and panel assembly, and the meter will be removed, as there will be the 320 amp meter ahead of this meter/panel combo.
Yes, the electric utility has glass plates to install in place of removed meters, and they have meter jumpers to install into the line and load meter jaws. You will need to check with your inspector to determine if he will allow the meter in the panel to be jumped out as a permenet solution. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
What is the wire size in this service. And what size triplex does it use
Built a pole barn in the back yard, was going to upgrade the house service and run from there, but thanks to the county I am running separate service. I have the 3" conduit, I know I need to leave 35' coiled at the bottom of the utility pole, and want to run about 5' inside the barn to get to...
I have a 320 amp service I have my meter mounted on a pedestal by my house with 2 disconnects on the right side. I have 2 200 amp boxes in my house in different locations. I was wondering how I would ground my disconnects outside and if I had to ground or bond my 200 amp boxes inside and how
How to ground a 320 amp service?
I set 2-200 amp panels inside a house and a 320 amp meter base outside am I going to need a meter panel combo for the main panel and use both of the inside panels as sub panels. Right now I have just the meter outside both panels has main breakers
View more questions Search
|
