Ask Experts Questions for FREE Help !
Ask
    Raymo2's Avatar
    Raymo2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 1, 2012, 11:19 AM
    State Select Gas Hot Water Heater Pilot & Burner Goes Out
    I have a Stat Select 50 Gal Gas Hot Water Heater made in 2005. Yesterday there was no hot water. The pilot light had gone out. I relit the pilot and the burner came on.

    This morning there was again no hot water. The pilot was out again and I relit it and turned on the burner. I noticed that the burner cut off after about 3-5 minutes and the pilot was off again. I did this several more times and the same happened.

    I tried just having the pilot on and it went out without the burner on.

    Could this be a pilot problem or a control unit problem.hnks for any help.
    Mcmanamon1's Avatar
    Mcmanamon1 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Aug 12, 2012, 05:08 AM
    No hot water, Burner will not stay lit. Thius morning the blower does not go on after several attempts to turn off let sit and turn back on.

    Nothing, It's like no power. Circuit panel check and is working, brand new 2005.
    wgi28's Avatar
    wgi28 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Oct 26, 2012, 08:11 AM
    Do you still have the water heater? What is the model #?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Does a state select water heater gas valve have a pilot flame adjustment screw? [ 1 Answers ]

I have a state select water heater and I changed out my thermalcouple and replaced the gas valve. The pilot would not light. so now the pilot light does stay on but goes off once in awhile. There is no draft. It appears to go off at times after the main burner lites . It gets frustratiing. Any...

State select water heater pilot light how to relite the pilot [ 3 Answers ]

I have a State Select Water Heater, I am assuming the pilot light has gone out as I have not hot water. What process do I do to see if this is indeed the problem before calling in a service man.

How do I jump start an exhaust fan on a state select gas hot water heater? [ 1 Answers ]

It has happened before and a repair person jumped it and ordered a thermacoupler but it has lasted a year. I want to try it again myself to see if I can avoid a bill. The pilot light is lit.

State Select Gas Hot Water Heater - main burner will not light [ 2 Answers ]

My main burner will not light. After the hot water heater power cycles three times, the hot water heater shuts down and the following error code is displayed: 100110 which the owner's manual says is System Lockout Things I have tried: Repositioned the igniter assembly several times...

Unable to light pilot on "previously" winterized State Select gas water heater? [ 4 Answers ]

I'm a home inspector and today inspected a 4 year old home in which the bank had the home winterized.. We turned the gas on and were able to operate the kitchen range, and the gas furnace took about 15 minutes to lite with the electronic ignition continuing to try lite the furnace an eventually...

View more questions Search