Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring replacement heat pump fan motor and capacitor
[ 15 Answers ]
Hi. My heat pump fan motor died. I got a replacement motor and capacitor but the wiring is a bit different for the new parts and I was hoping you could help me sort it out. The old capacitor had three terminals while the new one has only two. In the old setup, there were 5 wires to deal...
My condenser fan motor went out in my heat pump,
[ 0 Answers ]
Is it OK to get a new one that has a greater RPM? My old one ran at 840 RPM but it is hard to find one.
Help with Universal Fan Motor Replacement on a Goodman Heat Pump
[ 15 Answers ]
My old fan motor had a 3 wire set up. Brown -> Cap, Black -> contactor, Purple -> Circuit board. My new replacement motor has a 5 wire set up. Green and white -> ground? Brown ->?? Brown/White ->?? Black ->? And White ->? From what I understand, the B, B/W will go to the new capacitor, and I'm...
How to wire a condenser fan motor for carrier heat pump
[ 3 Answers ]
I ordered an AOSmith OCC1026 and they sent me OCC1026A. Specs seem the same, except the end without axle has open slots unlike old motor which was a solid plate. Is this a problem? I have a rain shield for the top and the motor would sit vertical. I thought I read somewhere that the occ1026a is...
Heat pump fan motor won't turn
[ 2 Answers ]
Hey I have rudd heat pump and the fan motor won't turn it turns about 2 inches and stop if I need a capacitor what size my model # rjma-a048jk serial # 5592 f219812989 View more questions Search
|