Ask Experts Questions for FREE Help !
Ask
    skust's Avatar
    skust Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 31, 2011, 10:06 PM
    My condenser fan motor went out in my heat pump,
    Is it OK to get a new one that has a greater RPM? My old one ran at 840 RPM but it is hard to find one.

Check out some similar questions!

Condenser Fan Motor Wiring for Goodman AC Heat Pump 3 Ton [ 5 Answers ]

Condenser Fan Motor Wiring for Goodman 3 Ton -------------------------------------------------------------------------------- Hello Everyone, I have a GOODMAN A/C Heat Pump Model# CPLE 36-1 installed 3 years ago. Last week I turned the unit on, the compressor hums (not run)about 3-5...

Trane condenser fan motor to A.O.Smith condenser fan motor [ 2 Answers ]

The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...

Central heat pump condenser fan motor do not work [ 1 Answers ]

Fan motor works only for about 30 minutes and shuts off. Compressor continues to run. Fan motor usually restart within 3-4 hours later or the next day. I can sometimes use a stick to get motor going. Is this a motor problem or a capacitor problem?

Heat pump fan motor won't turn [ 2 Answers ]

Hey I have rudd heat pump and the fan motor won't turn it turns about 2 inches and stop if I need a capacitor what size my model # rjma-a048jk serial # 5592 f219812989

Rudd Heat Pump needs Condenser Motor Wired [ 1 Answers ]

My unit is a Rudd model# UPGB-025JAZ, 208/230 volts year 1997 I believe I have a single pole contactor with a 24 volt coil.. PS thanks for hanging in their with me!

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.