Amana 80 see furnace

shadow69 Posts: 1, Reputation: 1

New Member

Nov 26, 2011, 11:44 AM

Amana 80 see furnace

I have an amana 80 see furnace and it comes on and lights for a second than shuts off does this several times then sometimes when it comes on it lights fine and stayes running until it reaches desired temp then shuts off like normal

Check out some similar questions!

Amana furnace [ 2 Answers ]

Hi Everyone, I am having so much trouble, trouble shooting my furnace, I have a Amana Furnace, I noticed that the Burner is not staying long enough for the heat to blow through the vent. This is my observation, once adjusted the temp desired in the thermostat, the burner on the furnace...

Furnace Amana 80? [ 1 Answers ]

Q. Red indicator light located on the ignition control unit is ON. What is wrong with my Amana 80 Furnace? Please help

Amana furnace [ 2 Answers ]

I misplace the wiring diagram and installation manual for my Amana Furnace. Any chance someone, website may have a good source for that: Mod # GUCO70B40A, Serial # 9110104173, Mfg # P9114303F Suggestions for a fix would be appreciated also: Having problems starting. The igniter works fine...

Amana furnace installation [ 1 Answers ]

Amana furnace that was installed in my house used 2" pvc for the exhaust. i was told by a technician that was out for a repair that it should have been vented with 3" pvc. Model#gvva070ax40

I have an Amana 80+ furnace. [ 1 Answers ]

When the temperature reaches the desired setting, the gas burners turn off as they should, however the fan continues to run and blows cold air. The temperature dips well below the thermostat setting, but the burners do not turn back on and the fan continues to run. I also notice a flashing red...

View more questions Search

Check out some similar questions!

Add your answer here.