 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
The wires are about 10 inches too short. In normal wiring one would make a junction box and wire up extensions, but there is no place for a junction box inside the unit, of course. The original fan motor also used a flexible metal conduit, although the new fan wires appear to be overinsulated for...
I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...
I have a Trane unit with GE condenser fan motor number 5kcp39fg. New condennser fan motor is A.O. Smith number F48k92A01. My question is on the old fan motor there were only 3 wires two for cap and looks like 1 for motor line and the new motor has a brown and brown/white for cap a black for line...
I just bought a new condenser fan motor, the old one has three wires, black purple and brown. The new motor has four wires black,white,brown, and brown/white. The new motor came with its own capacitor, Do I use the old capacitor also for the compressor?
I had someone ask me today how to replace a 3-wire condenser fan motor with a 4-wire motor. He said there was not a 3-wire connection diagram on the motor. I told him to just use a new capacitor and wire it with all 4 wires. But my question is; Can any 4-wire motor be wired with the 3-wire...
View more questions Search
|
