Ask Experts Questions for FREE Help !
Ask
    mb1205's Avatar
    mb1205 Posts: 1, Reputation: 1
    New Member
     
    #1

    May 5, 2010, 10:15 AM
    Can any 4-wire condenser fan motor be wired with 3 wires
    I had someone ask me today how to replace a 3-wire condenser fan motor with a 4-wire motor. He said there was not a 3-wire connection diagram on the motor. I told him to just use a new capacitor and wire it with all 4 wires. But my question is; Can any 4-wire motor be wired with the 3-wire connection or only ones that are specified to connect both ways?

Check out some similar questions!

Replacement condenser fan motor wires are too short - now what? [ 2 Answers ]

The wires are about 10 inches too short. In normal wiring one would make a junction box and wire up extensions, but there is no place for a junction box inside the unit, of course. The original fan motor also used a flexible metal conduit, although the new fan wires appear to be overinsulated for...

How do I wire up my new AC condenser fan motor? [ 7 Answers ]

My new AC condenser fan motor has an extra wire. What do I do with it? AC is a 1996 SEER 12 Rheem. New motor is an A.O. Smith 1/8 HP 208 RPM 208-230 volt. Old motor has 3 wires, black, brown, and orange. New motor has 4. Black, brown, orange, and brown with a white stripe. Does anybody...

Old AC condenser fan motor - which wires are which? [ 5 Answers ]

I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...

How do I wire a new condenser fan motor [ 5 Answers ]

I have a Trane unit with GE condenser fan motor number 5kcp39fg. New condennser fan motor is A.O. Smith number F48k92A01. My question is on the old fan motor there were only 3 wires two for cap and looks like 1 for motor line and the new motor has a brown and brown/white for cap a black for line...

How do I wire up a new condenser fan motor [ 5 Answers ]

The old condenser fan motor (EMERSON model # is K48HXFCN-3727,HP-1/8,v 208-230,rpm 1075with 3mfd 370vac dual capacitor) is making a noise.When I got a new one (EMERSON model#is K48HXTMG-4003 HP-1/8,v208-230,rpm1075 come with 5.0mfd 370vac capacitor). I am confused, I need help trying to do the...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.