 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Changing a condenser fan motor with different wires?
I just bought a new condenser fan motor, the old one has three wires, black purple and brown. The new motor has four wires black,white,brown, and brown/white. The new motor came with its own capacitor, Do I use the old capacitor also for the compressor?
|
||||
Check out some similar questions!
The wires are about 10 inches too short. In normal wiring one would make a junction box and wire up extensions, but there is no place for a junction box inside the unit, of course. The original fan motor also used a flexible metal conduit, although the new fan wires appear to be overinsulated for...
I have a Climatrol unit with an Emerson condenser motor that is shot. I bought an Emerson Rescue motor to replace it from the local AC supply store. The wiring diagram was stored in the AC unit, and it is no longer readable. The three disconnected motor wires from the old unit are yellow,...
The Condenser fan motor I removed from a Trane unit had four wires 1 black, 1red, 1brown and . The black wire went directly to #3 on the relay, the red wire went to the capacitor with black wire from #6 on the relay the brown wire went alone to the other side of the capacitor. I purchased...
I had someone ask me today how to replace a 3-wire condenser fan motor with a 4-wire motor. He said there was not a 3-wire connection diagram on the motor. I told him to just use a new capacitor and wire it with all 4 wires. But my question is; Can any 4-wire motor be wired with the 3-wire...
I have a Trane ac unit. I'm not sure on it's size.The condenser fan motor went out and I had a tech out he removed the motor. The motor is a GE model # 5kpc39kgV566S. My landlord wants to wait for his buyer assurance warranty to take affect b(2-3 weeks). It's been over 100 degrees all week so a...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
