Ask Experts Questions for FREE Help !
Ask
    bigdhorse's Avatar
    bigdhorse Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Apr 9, 2011, 09:56 AM
    f bay lighting
    Im installing 4each fbay lights 6x54watts do I need more then one neural or white wire
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Apr 9, 2011, 10:23 AM
    Are you asking because there are two ballasts in the fixture?

    In any case, the answer is no.
    bigdhorse's Avatar
    bigdhorse Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Apr 16, 2011, 06:24 AM
    Im installing 4 fay 6x54 do they need a separate newral for each fixture?
    Im installing 4 fbay 6x54 do they need a separate neural for each fixture?
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #4

    Apr 16, 2011, 06:27 AM

    I'm sorry. I have absolutely no idea what you are asking.
    Can you try again with some more detail?
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #5

    Apr 17, 2011, 04:10 AM
    And apparently my answer was not sufficient.

    I asked a question in an attempt to get more detail.

    Asking the same question without answering my question will not get your question answered any faster or different.

    Perhaps I should have told you, yes, each fixture needs a separate neutral, is that the answer you want?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay fan and lighting co? [ 1 Answers ]

I have a 17 " semi-flush Hampton Bay light fixture in a terrazzo finish in the Atlantis series. Is there a ceiling fan that goes with it or is a close match?

Hampton bay fan and lighting co? [ 1 Answers ]

We have a fan which is about 9 years old the other day one of the lights keep flickering my husband tightened it a little and it quite. That was a few days ago. Today we went to turn it on and nothing except on a couple of the bulbs filaments lit a little, that was it now fan nor light works

High Bay lighting [ 3 Answers ]

Metal Halide High Bay lighting,what is pulse and non pulse ? Do I have to change the ballast to non pulse if I want to screw in a 200watt compact fluorescent?

Hampton Bay under counter lighting [ 3 Answers ]

I've purchased Hampton Bay under cabinet lighting set, 3 hockey puck type lights. The kit comes plugs and switch to work in conjunction with a hot outlet. I would like to have these lights work on a tradition in wall switch. I have already increased my light switch box from 1 to 2 and the...

Hampton Bay exterior lighting [ 2 Answers ]

I have a Hampton Bay exterior porch light fixture with a sticker that reads: Use only A19 bulb 100 watts maximum. My question is: Can I use a compact fluorescent bulb 14watts? Thank you

View more questions Search