 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay fan and lighting co?
We have a fan which is about 9 years old the other day one of the lights keep flickering my husband tightened it a little and it quite. That was a few days ago. Today we went to turn it on and nothing except on a couple of the bulbs filaments lit a little, that was it now fan nor light works
|
||||
|
||||
|
Either the motor is starting to go and is drawing so much current, that the lights can not get enough, or there is a broken or bad wire somewhere. Try removing all the lights and see if it runs. If so, the problem is in the lights or their wiring, if not, its either the wall switch, wiring, or motor.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have the model UC7078T how do I reset the remote
I have a Hampton Bay ceiling fan 52" and even though is a 3 speed fan, only one speed is working. On the lowest speed, the blades don't move but you can feel on the chain that the motor is on. Can the part of the speeds be changed, where to buy the part and can it be done as DO IT YOURSELF?
I havee the redington 2 fan and light . I dropped the remote and now I can not turn the light or the fan on. I took that remote and changed the code to one of my other fans and the remote worked. I also took another remote with another fan that was the same and changed the code to the fan that did...
Model 129-909 Nassau 52" Like all ceiling fans had some problems putting together and putting on ceiling. The fan worked but would never get the lighting working. We check to see if electicty was getting through. It was not, we recheck wiring still nothing. Any help?
View more questions Search
|
