 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant 90 plus model 350mav series d Buzz noise no blower turning
Woke up to a burning smell this morning so I went down stairs turned off the gas and power took off the main cover, took out the 2 screws to the lower cover, Depressed the lower cover button and then turned the power on... once I did that then shortly after a buzzing sound came from the blower area..
The blower cage will turn easy. Time to replace the blower motor? Any help would be great. |
||||
Check out some similar questions!
I have a Bryant 350MAV and would like to have an ECM blower motor installed to allow for continuous slow speed air recirculation. The unit is 12 years old and runs like a top. I've installed a fireplace insert in my home and the air handle return in that room would recirculate the heat on a slow...
Bryant model 350mav060120, series C code 31... I have replaced the pressure switch and intermittent heat problem solved for a week then it started going off and on again and is now not running and is flashing a code 31. I suspect the motherboard as there is sometimes a high short buzz coming from...
Bryant #350MAV exhaust motor makes a gravelly noise, is the problem the motor or is there a bearing that can be replaced?
I was told by a service repair firm that the blower motor and wheel needs replacing for a Bryant Model 350MAV condensing gas furnace (10 years old). There is quite a bit of noise when it runs and the unit vibrates at bit at the blower housing. His cost was nearly $1000. I think I can do it...
Hi, I recently had a furnace repairman in who told me our inducer on our Bryant Model 350MAV furnace needed to be replaced. He said the total cost would be $1075.00, including $890.00 for the inducer. This seemed high to me. Can anyone give me an idea of what this repair should have cost,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
