 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant model 350mav060120, series C code 31
Bryant model 350mav060120, series C code 31... I have replaced the pressure switch and intermittent heat problem solved for a week then it started going off and on again and is now not running and is flashing a code 31. I suspect the motherboard as there is sometimes a high short buzz coming from that area. I need help!
Thanks, rfh4bch |
||||
Check out some similar questions!
I am getting error code 24 on my bryant furnace. Could someone please help me by letting me know what the code is, and how to fix it? I was trying to install a new thermostat and might have got wires crossed. Thanks
Getting a code 14. 1st the system comes on. I hear the blower going for about 90 seconds. 2nd the blower wheel spins and eventually I start to smell gas. The unit clicks 3 times but the ignitor never comes on. That's when I get a code 14.
I am trying to replace a bryant tstat with a hunter programmable tstat. The bryant is a single-speed heat pump with FK4 fan coil and special 3-stage electric heat (model 2s tstat) the hunter model is 44860 Assuming that it is a compatible tstat, is it easy to install? Thanks, ed
My furnace has been short cycling. Bryant upflow forced air furnace Series SB C Model 100 393J It will run for approximately 10 to 15 seconds, shut off for approximately 1 minute, run for 10 to 15 seconds, shut off for approximately 1 minute. It does this for around 7 to 9 times then...
I have a Bryant Model 330AAV Upflow- the flashing indicator lights say it could be a Pressure switch, Draft safeguard switch stuck, or low heat pressure. How do I determine what the problem is?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
