Ask Experts Questions for FREE Help !
Ask
    bmrose's Avatar
    bmrose Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 10, 2011, 08:31 PM
    Please help old bryant furnace
    I have an old bryant furnace model # 3946aw036100. The thermestat has no control on the furnace and it just keeps heating the house , the only way to stop it is to turn off the main switch on the furnace. If any one has any ideas ,pleas help
    oneexception's Avatar
    oneexception Posts: 92, Reputation: 10
    Junior Member
    		  
    #2

    Feb 6, 2011, 02:06 AM
    Could be one of a couple different things. Did this just start happening? Id start with the thermostat. Has it ever been replaced or is it old as well? If so, that may just be the culprit. You can find one at your local home improvement center or hardware store for $20.-$50.- on average, depending on the features your looking for.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My Bryant furnace blows the 3 amp fuse when the furnace is kicked on, but ac works fi [ 0 Answers ]

Switch furnace to emergency mode on my Bryant 90 furnace [ 2 Answers ]

I have run out of propane and we are in the middel of a blizzard. How can I switch my furnace to emergency mode? Thanks, Brett

Bryant furnace [ 2 Answers ]

I have nine years old 80 BTU furnace.when I turn it on it start and shut down.if I open furnace door and start it works well.what is the problem?

Bryant furnace [ 0 Answers ]

My Bryant furnace doesn't do anything. The indicator light on the control board is on all the time, no fault code. New t-stat, new ignitor have followed all instructions inside panel. Does not fire. Model # 312JAV036070

Bryant furnace [ 1 Answers ]

I have a bryant from 1991. When I turn up heat the fan starts then ignitor starts, lights pilot and will run like that for about 5mins then shuts down and won't try to relight until I reset the power. When the pilot lights the flame is kind of weak. The blower is blowing it hard and it will...

View more questions Search