Ask Experts Questions for FREE Help !
Ask
    loki21flash's Avatar
    loki21flash Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Dec 15, 2010, 07:09 PM
    I think my furnace gas valve is bad how do I know for sure before buying a new one
    Pilot light is lit, burners won't ignite, brand new thermostat, everything clean, and have newer burners
    PaulKChaney's Avatar
    PaulKChaney Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 8, 2011, 11:17 PM
    I just found this:
    http://millivoltkit.com/Home_Page.html

    I am replacing mine and it is safer.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Gravity furnace gas valve [ 3 Answers ]

Have an old gravity furnace. Pilot generator putting out 575 mv, however gas valve won't open (ITT General Controls B60 gas valve). How do I troubleshoot valve? What external or internal checks? I have the valve head off and looking under the diaphragm I don't see anything obvious. I'm not...

Can a gas valve go bad from a flood? [ 1 Answers ]

Already changed the board,I also took apart the gas manifold to drain any excess water, and cleaned the orfices... and now no gas comes out

Carrier Natural Gas Furnace main gas valve will not open every call for heat [ 1 Answers ]

We have a Carrier Weather Maker 8000 Natural Gas Furnace not functioning properly. We have replaced pressure switch, hot surface ignitor, flame sensor and control board. It will cycle 3 to 4 times and then not come back on. Is it possibly a bad coil on gas valve?:rolleyes:

Furnace gas valve operation [ 1 Answers ]

I have an older Dayton model 3E473A wall furnace that has a bad gas valve. Grainger no longer sells replacement parts for this furnace. I went on line and using the part no. of the existing bad gas valve (Robert Shaw 7000 AERB-5-S7C), I found a cross referenced replacement gas valve (GSV720402). My...

Gas furnace valve [ 1 Answers ]

I read one of the Q & A's about a gas valve for an Empire direct vent wall furnace, model #DV-215-7SG-LPG. So far I've been able to determine that it's the solenoid that's bad, anyhow,I've replaced it with a new valve and I've been serarching desperately to find another replacement valve for 2...

View more questions Search