Ask Experts Questions for FREE Help !
Ask
    jack81's Avatar
    jack81 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Oct 18, 2010, 09:18 AM
    Can a gas valve go bad from a flood?
    Already changed the board,I also took apart the gas manifold to drain any excess water, and cleaned the orfices... and now no gas comes out
    PaulKChaney's Avatar
    PaulKChaney Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Jan 8, 2011, 11:22 PM
    Absolutely! I wouldn't trust it. Be safe and replace it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sewer flood control valve [ 5 Answers ]

Is one type of sewer check valve better than the other. I have had 3 quotes on installing one. All approximately the same price. One is single gate valve, one is a double gate valve and the third is a balanced valve. Any recommendation on which to use?

What would cause my 13.5 hp briggs&straton to flood spark plug chamber with gas [ 1 Answers ]

What would cause my 2006 13.5 hp yard machine mower to flood the spark plug chamber with gas? When I pull the plug gas pours out.

Amana gas heating unit will not heat. Gas valve comes on, ignites then goes off. [ 1 Answers ]

The gas valve comes on and I hear ignition. The flame then immediately goes out and the process repeats. I turned the unit off because as long as I leave it on the process repeats continuously.

Flexi vs. Black iron gas line to water heater gas valve [ 3 Answers ]

I have seen gas water heater " install kits" that use the yellow flex appliance line for the gas connection to the gas valve on the water heater. My tank was installed when the house was built and has black iron pipe all the way to the union and into the valve on the tank. I have heard some codes...

Gas valve noise on main valve engagement [ 1 Answers ]

I have a carrier 58gs100ga furnace with a white rodgers 36e93 gas valve. The main gas valve solenoid chatters or rattles for a split second before it stays engaged after the pilot is proved. I just replace the spark/lock out board and the fan board for a different problem. This chatter is...

View more questions Search