 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My trane furnace - mod# b1u108e94821 burner does not lite.
There's also a very low humming sound coming from one of the electric panel. Just before the unit stopped working there was a clattering sound coming from the furnace. Not the fan no metal hitting. How do I fix this ?
|
||||
Check out some similar questions!
Trane XV90 - Red Led Lite Port fm Data - 1 Flash every 20 seconds Green Led - steady flash every second Problem: The unit is no coming on, the condenser is running, the thermostat is set at Cool 75 degrees, and is registering 86 degrees in the house; the '*' indicator is...
Hello I have a older york furnace gas converted to propane it been great when turning it on everything works but when the burners light they go out in about 3 to 5 secounds dose it three time then goes to call for no heat code I've put in new flame sencor sill same think can you help thanks jim...
I have a Maytag Neptune MDG3000AWW gas dryer that will lite in all three modes (intellidry , time dry/air fluff, and intellidry ) but will only stay lite of 8 to 10 seconds. After ltwo or three minutes it lites again for another 8 to 10 seconds. Takes all day to dry a load.
I'm not sure if this is the right place for this question, but this site has been very helpful with other questions, so here goes. I recently modded my dvd drive (voided the warranty too, I know) and I was wondering if anyone knows of a way that I can connect an LED inside the drive that lights up...
I have a forced hot air Trane xe 80 furnace. Electronic ignition. At times the burner will not ignite. The fan motor runs and only cold air is coming out. If I turn the furnace switch off then on again, it will glow and then the burner will ignite. This could last for days, then it will do it again.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
