 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Hello... so I just purchased a house that has a nice fan w remote on the master bed. The first few days, worked fine then the light stopped working and the fan would only work on med. Speed (has low and high as well). A day after stopped working all together. Here are the specifics. The wall switch...
I installed a new CFL lightbulb, when I turned on the light I heard a pop and smelled something nasty. Afterwards when I turned off the light all the left over light bulbs constantly flicker. They turn on OK but only flicker when I turn them off. By turning off I mean with the remote, but leaving...
After a fuse blew,dimmer on remote control won't work.Light is either on or off
I have a combination Hampton Bay ceiling fixture with fan. It has remote to turn the light on or off, fan on or off... there are two pull chains, one in the very center of the fixture, one on the section above the lights. I know power is getting to the unit... everything else in the room...
I have a Hampton Bay celling fan with a light, it suddely stopped working could a broken reciver cause it to stop working, if so I want to remove the reciver and make it manual, Beofore I toss it and buy a new one. Also what do I do with the wires that say light and motor, they are currently going...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
