Ask Experts Questions for FREE Help !
Ask
    aznonpho's Avatar
    aznonpho Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Dec 26, 2009, 12:38 AM
    Goodman Furnace Problems
    Hi My Furnace Starts and everything then it stops, then it repeats this process over and over what's wrong with it? I have a Goodman furnace, its relatively new the house was built in 2002. Please help it just snowed! IM FREEEZING :( what's wrong with it is it the ignition lighter thing?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #2

    Dec 26, 2009, 04:44 AM
    Try cleaning the flame sensor with steel wool or fine sand paper.
    Attached Images
      
    aznonpho's Avatar
    aznonpho Posts: 8, Reputation: 1
    New Member
    		  
    #3

    Dec 27, 2009, 07:46 PM

    I cleaned the flame sensor stick and it works now but a day later its doing the same thing again? Is the flame sensor stick need to be replaced?
    hvac1000's Avatar
    hvac1000 Posts: 14,540, Reputation: 435
    Heating & Air Conditioning Expert
    		  
    #4

    Dec 27, 2009, 09:49 PM
    That is a possibility, If you have a good test meter look at the link below.
    Attached Images
  1. File Type: pdf Doc1.pdf (42.4 KB, 191 views)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Goodman furnace problems [ 21 Answers ]

Hi - I have a Goodman GPM furnace. It works intermittently. I replaced breaker, thermostat, Control board and surface igniter. All appears well on start up sequence ; blower runs and igniter heats up and then turns off as no gas comes out. Control board codes says OK. Can anybody recommend what to...

Goodman furnace problems [ 3 Answers ]

Goodman furnace won't come on light blinks 6 times and the blower motor run continueous.

Goodman furnace ignitor problems [ 7 Answers ]

Having an issuse with my goodman furnace. Ignitor turns red, flame comes on, and then goes out. Ignitor will head up again, flame on, and then off. THis repeats. I've taking off the sensor and cleaned it to a sparkly new look. Taken the burner housing out and cleaned them individually of all...

Goodman furnace problems [ 3 Answers ]

Son in law has a Goodman natural gas furnace. No heat. LED is flashing 4 times ('Upper limit open' is the message associated with this error). The blower motor turns on, the exhaust motor (I think that's what it is) turns on for about 10 seconds then turns off. Tried changing the air filter (was...

View more questions Search