Ask Experts Questions for FREE Help !
Ask
    szar's Avatar
    szar Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 25, 2009, 09:52 AM
    Wiring RTH6400 tstat
    Old tstat has the following wire codes some that aren't identified in wiring instructions:
    Old wiring;
    G
    Y1
    R
    E
    W1
    O
    C -states not to use

    Also saw a pink and gray wire not labeled that was pushed back and not used on old tstat
    Can anyone help?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Oct 25, 2009, 05:30 PM

    This thread should help you understand the color coding better https://www.askmehelpdesk.com/heatin...tml#post268211

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Tstat AC Circuit wiring [ 0 Answers ]

I have a Chronotherm IV tstat and continue to blow circuit board fuses. I followed the wiring diagram that was provided... there are two transformer circuits and the heating is running fine. Cannot get the stat to work. I have jumpered both fan and condenser circuits and got them both to work....

Wiring from old ruum tstat to hunter tstat [ 7 Answers ]

https://www.askmehelpdesk.com/attachment.php?attachmentid=20991&stc=1&d=1245520740 https://www.askmehelpdesk.com/attachment.php?attachmentid=20992&stc=1&d=1245520740 First pic is my old tstat - I believe it is a heat pump. (note that orange wire and gray wires are not used, E and W2 are...

Wiring a rth6400 to heat pump [ 3 Answers ]

Old thermostat wiring w-w and y; r-r; g-g; y-o New wiring r-r; g-g; the w wire and y are where my problem is, does the w go to w and y and the y go too/b/

TSTAT wiring [ 2 Answers ]

I am replacing a Robertshaw 9520 TSTAT with a Carrier TSTATCCREC01. The current wiring on 9520 goes to these terminals. W2 has only a jumper. R, Y1, O, G, E, C, And a jumper from W2 to E. The carrier terminals are as follows:

Tstat wiring [ 4 Answers ]

I am putting in a honeywell tstat TH8110U, and have two wires coming out the wall (white and black). Is the white the heat relay?


View more questions Search