Check out some similar questions!
How can I tell if my pressure switch is faulty I have a sumbmersible system
[ 3 Answers ]
My submersible pump went so I changed the pump and still can't get water is it my pressure switch or something else. We had a very close lightning strike last night
New switch, possibly faulty?
[ 15 Answers ]
I have a double light switch (both Single Pole) which went bad... I picked up a new switch which looks to be the same (2 hot terminals, 2 neutral)... I hooked everything up the same way as the old switch (which also had 2 hot, 2 neutral lined up the same).. Now the switch turns on both lights at...
Faulty high pressure switch
[ 1 Answers ]
Hi.I need to know if I can change out a faulty high pressure switch screw type on a Rheem with out losing any freon.
We think we have ruptured well water line because of a faulty pressure switch
[ 8 Answers ]
We had pressure switch to our submersible well that was not cycling on and off. We cleaned the points and thought everything was OK. Several days later we discovered water coming up around the casing to the well. We then realized the pump had been running continuously. We replaced the pressure...
Faulty pressure switch
[ 2 Answers ]
I have a Concord 80 Plus Gas Furnace. I had a friend look at it when it was blowing out cold air when turned on, and he said the burners were not kicking on for some reason. When taking a few things apart, he determined that it was due to a faulty pressure switch. When the two wires that attach to... View more questions Search
Add your answer here.
|