Ask Experts Questions for FREE Help !
Ask
    parttimeplumber's Avatar
    parttimeplumber Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 15, 2009, 03:36 PM
    How can I tell if my pressure switch is faulty I have a sumbmersible system
    My submersible pump went so I changed the pump and still can't get water is it my pressure switch or something else. We had a very close lightning strike last night
    bones252100's Avatar
    bones252100 Posts: 253, Reputation: 29
    Full Member
     
    #2

    Jul 15, 2009, 04:14 PM

    "Very close lightning strike last night" would cause me to check circuit breakers & FUSES. This submersible pump is being used in what pool of water? Is it a pool, boat, drainage ditch, sewer system...
    Repost with more info.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #3

    Jul 15, 2009, 04:20 PM

    What's pressure reading on the tank?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
     
    #4

    Jul 15, 2009, 04:32 PM

    Parti, as has been suggested, first check the breaker. Then, simply remove the cover to the switch and see if the points are closed. Get back with that info.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

New switch, possibly faulty? [ 15 Answers ]

I have a double light switch (both Single Pole) which went bad... I picked up a new switch which looks to be the same (2 hot terminals, 2 neutral)... I hooked everything up the same way as the old switch (which also had 2 hot, 2 neutral lined up the same).. Now the switch turns on both lights at...

Home watter pressure system switch [ 2 Answers ]

I replace the watter pressure switch after repairs of a pump. Now I'm not able to sett the kick in and shut off limits (it's the one with manual shutoff lever and two adjusting nuts). Thank you Mark

Faulty high pressure switch [ 1 Answers ]

Hi.I need to know if I can change out a faulty high pressure switch screw type on a Rheem with out losing any freon.

We think we have ruptured well water line because of a faulty pressure switch [ 8 Answers ]

We had pressure switch to our submersible well that was not cycling on and off. We cleaned the points and thought everything was OK. Several days later we discovered water coming up around the casing to the well. We then realized the pump had been running continuously. We replaced the pressure...

Faulty pressure switch [ 2 Answers ]

I have a Concord 80 Plus Gas Furnace. I had a friend look at it when it was blowing out cold air when turned on, and he said the burners were not kicking on for some reason. When taking a few things apart, he determined that it was due to a faulty pressure switch. When the two wires that attach to...


View more questions Search