Ask Experts Questions for FREE Help !
Ask
    jalo117's Avatar
    jalo117 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 31, 2009, 08:40 AM
    Removing a tub diverter stem
    I can't seem to be able to remove a defective Sterling Diverter Stem from my bathtub. I have sprayed it with WD-40 for about 2 weeks. Is there something I can use to free up the threads. It is a brass fitting into a copper elbow. I am afraid if I use too much pressure it will break off in the wall.it does not appear to be soldering into place.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Jul 31, 2009, 10:05 AM

    Show us a picture.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Diverter stem [ 3 Answers ]

How do I install a new diverter stem extension in my shower. Can't remove the old one.

Sayco diverter stem [ 6 Answers ]

I'm working on old apartment building.. trying to replace old sayco diverter stem.the newer one I bought at a plumbing house look like a perfect match but when I install part of the water still flows out tub spout when it is diverted to shower.. not many moving parts... hard to see where problem...

Diverter stem confusion [ 4 Answers ]

Hello to all, First off, my apologies if this becomes long and a bit disjointed. Confusion reigns supreme in my plumbing knowledge. I'm having a problem with the diverter stem on my shower. I believe it is a Briggs unit because around two years ago, I replaced both the hot and cold stems...

Diverter Stem [ 1 Answers ]

I am replacing seats and stems in tub/shower. The old one is Sterling--the new faucet set it a PricePfister. The PF diverter stem doesn't fit into the seat (the hot and cold stems do). Can I go to another size diverter with PF?

View more questions Search