Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Shower Diverter Stem
[ 1 Answers ]
I have an older house, with the hot, cold knobs and middle diverter. I have changed both the hot and cold sides with no problem. I have taken the packing screw, cap, the small nutt, the larger nutt, the screw on cover that conceals the stem, now I only have the stem left but it will not come out....
Diverter stem confusion
[ 4 Answers ]
Hello to all, First off, my apologies if this becomes long and a bit disjointed. Confusion reigns supreme in my plumbing knowledge. I'm having a problem with the diverter stem on my shower. I believe it is a Briggs unit because around two years ago, I replaced both the hot and cold stems...
Diverter stem works 50/50
[ 4 Answers ]
I have a three handle shower/tub and I recently replaced the inner seat and diverter stem.The problem is that when I open the shower(upper part),water still comes out the bottom spout.I have applied teflon tape plus taken apart the diverter stem and all seems good.I have unscrewed the diverter with...
Diverter Stem REplacement
[ 1 Answers ]
My home is over 30 years old. I recently purchase new tub/shower handles for an upgrade project. I had no problems until the diverter stem broke. I purchase a diverter stem and it fits except the stem is too short. I cannot find a diverter stem that is the right diameter and length. Is there a...
Diverter Stem
[ 1 Answers ]
I am replacing seats and stems in tub/shower. The old one is Sterling--the new faucet set it a PricePfister. The PF diverter stem doesn't fit into the seat (the hot and cold stems do). Can I go to another size diverter with PF? View more questions Search
|