Ask Experts Questions for FREE Help !
Ask
    despec's Avatar
    despec Posts: 5, Reputation: 1
    New Member
     
    #1

    Jul 13, 2007, 07:33 AM
    Diverter stem confusion
    Hello to all,

    First off, my apologies if this becomes long and a bit disjointed. Confusion reigns supreme in my plumbing knowledge.

    I'm having a problem with the diverter stem on my shower. I believe it is a Briggs unit because around two years ago, I replaced both the hot and cold stems with Briggs stems (534NS) from Dinapolli Plumbing online. I also orders the diverter stem, which I'm assuming was also a Briggs. Just recently, I noticed that when the diverter valve was turned counter-clockwise to 'activate' the shower, cold water started leaking out of the cold water stem (through the escutheon). I removed the diverter and noticed that a washer (not sure what this one is called) over the stem that sits against the bonnet nut was dislodged and just running loose over the stem. Could this be causing the leak? What is this washer called and where might I find it. I could not locate this washer anywhere at Home Depot or Lowe's. And if all else fails, does anyone know where I might find a new diverter?

    Lastly, does anyone have a good diagram of a diverter and the pieces/washers attached?

    Any help would be greatly appreciated,

    David in Ohio.
    despec's Avatar
    despec Posts: 5, Reputation: 1
    New Member
     
    #2

    Jul 14, 2007, 12:32 PM
    Just bumping this up... sorry.
    despec's Avatar
    despec Posts: 5, Reputation: 1
    New Member
     
    #3

    Jul 16, 2007, 05:33 AM
    Bumping this up again.
    despec's Avatar
    despec Posts: 5, Reputation: 1
    New Member
     
    #4

    Jul 19, 2007, 06:11 AM
    Quote Originally Posted by despec
    Hello to all,

    First off, my apologies if this becomes long and a bit disjointed. Confusion reigns supreme in my plumbing knowledge.

    I'm having a problem with the diverter stem on my shower. I believe it is a Briggs unit because around two years ago, I replaced both the hot and cold stems with Briggs stems (534NS) from Dinapolli Plumbing online. I also orders the diverter stem, which I'm assuming was also a Briggs. Just recently, I noticed that when the diverter valve was turned counter-clockwise to 'activate' the shower, cold water started leaking out of the cold water stem (through the escutheon). I removed the diverter and noticed that a washer (not sure what this one is called) over the stem that sits against the bonnet nut was dislodged and just running loose over the stem. Could this be causing the leak? What is this washer called and where might I find it. I could not locate this washer anywhere at Home Depot or Lowes. And if all else fails, does anyone know where I might find a new diverter?

    Lastly, does anyone have a good diagram of a diverter and the pieces/washers attached?

    Any help would be greatly appreciated,

    David in Ohio.
    Bump.
    despec's Avatar
    despec Posts: 5, Reputation: 1
    New Member
     
    #5

    Jul 20, 2007, 01:44 PM
    Bump...

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Sayco diverter stem [ 6 Answers ]

I'm working on old apartment building.. trying to replace old sayco diverter stem.the newer one I bought at a plumbing house look like a perfect match but when I install part of the water still flows out tub spout when it is diverted to shower.. not many moving parts... hard to see where problem...

Diverter stem replace [ 1 Answers ]

I Already Change The Diverter Stem On My Bathroom Shower. I Installed A New One (sayco). It Works Ok, Except When I Rotote It To Change And Send Water Only On Top Shower, Because It Send Also Water To The Bottom Shower (both ways). Do It Have Any Particular Way To Install It? Do I need to...

Diverter stem works 50/50 [ 4 Answers ]

I have a three handle shower/tub and I recently replaced the inner seat and diverter stem.The problem is that when I open the shower(upper part),water still comes out the bottom spout.I have applied teflon tape plus taken apart the diverter stem and all seems good.I have unscrewed the diverter with...

Diverter Stem REplacement [ 1 Answers ]

My home is over 30 years old. I recently purchase new tub/shower handles for an upgrade project. I had no problems until the diverter stem broke. I purchase a diverter stem and it fits except the stem is too short. I cannot find a diverter stem that is the right diameter and length. Is there a...

Diverter Stem [ 1 Answers ]

I am replacing seats and stems in tub/shower. The old one is Sterling--the new faucet set it a PricePfister. The PF diverter stem doesn't fit into the seat (the hot and cold stems do). Can I go to another size diverter with PF?


View more questions Search