 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Craftsman Mower Electric PTO
The wires coming out of the electric PTO overheated and burnt the wires up that are inside the electric PTO. Now the mower will not crank to start. Is there a way to jump wires to take the PTO out of the circuit so I can start the mower. The battery shows plenty of voltage so I know it is not shorted out. How much work to change the PTO? I want to make sure it will start before I purchase a PTO. What would have caused this wire plug to overheat?
|
||||
|
||||
|
In a follow up to my post I found a fuse in the wiring harness blown. I replaced the fuse and now the starter tries to engage but only makes a clunk like the engine can't turn. When I engage the clutch I get nothing as I should. Could the clutch be locked not letting the engine turn? I am going to remove the belts tomorrow to see if it makes a difference. Thanks
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, first time I have posted hope I do it right. I have a 22 hp Troy Bilt garden tractor with an electric pto. My problem is the pto keeps shutting down, sometime I can go for a while other times it will kick out repeatedly. I have tried wiggling the switch and that doesn't seem to matter, also...
Troy Bilt 22hp Briggs/46'Deck Electric PTO clutch will not engage. Have changed out switch on the mower console... still no good. Removed clutch, looks OK. IS THERE ANY WAY TO TEST THIS CLUTCH?? Or should I look somewhere else... worked great one day,, the next week NOTHING!
We have a Craftsman 20.0 hp electric start 42" mower automatic lawn tractor Model 917.270940 and it appears the cable that allows you to engage the blades has broken. How do you either fix this problem or do we need to purchase a new cable. If we need a new cable how is it installed... I need...
Power on pto melts prongs and switch?
I am replacing the lower drive belt on my 23hp Troy-bilt pedal drive garden tractor. The last step in removing the belt is to remove the hex bolt from the center of the electric PTO clutch. When I try to loosen the hex bolt part of the electric clutch and the engine pulley turns at the same time....
View more questions Search
|
