Electric pto

ku4lt Posts: 1, Reputation: 1

New Member

Nov 6, 2006, 03:55 PM

Electric pto

Power on pto melts prongs and switch?

thebriggsdude Posts: 1,096, Reputation: 53

Ultra Member

Nov 6, 2006, 09:55 PM

Go over the wiring and make sure nothings shorting out

Add your answer here.

Check out some similar questions!

Troy Bilt electric pto [ 6 Answers ]

Hi, first time I have posted hope I do it right. I have a 22 hp Troy Bilt garden tractor with an electric pto. My problem is the pto keeps shutting down, sometime I can go for a while other times it will kick out repeatedly. I have tried wiggling the switch and that doesn't seem to matter, also...

Testing Electric PTO Clutch [ 3 Answers ]

Troy Bilt 22hp Briggs/46'Deck Electric PTO clutch will not engage. Have changed out switch on the mower console... still no good. Removed clutch, looks OK. IS THERE ANY WAY TO TEST THIS CLUTCH?? Or should I look somewhere else... worked great one day,, the next week NOTHING!

Electric Force and Electric Field? [ 1 Answers ]

Hello, Can some one explain to me briefly what's the different between electric force and electric field? I am having trouble to make them clear to myself. Thanks you so much. Jack

Electric PTO clutch removal [ 2 Answers ]

Hello, I have a Cub Cadet 2155 tractor with 15 HP Tecumseh engine. I'm trying to Replace the electric PTO clutch on the front of the engine. I have removed the center bolt but I'm unable to pull the clutch off the shaft. What type of pully puller do I need to pull the clutch off? There...

Troy-bilt mower and electric PTO clutch [ 1 Answers ]

I am replacing the lower drive belt on my 23hp Troy-bilt pedal drive garden tractor. The last step in removing the belt is to remove the hex bolt from the center of the electric PTO clutch. When I try to loosen the hex bolt part of the electric clutch and the engine pulley turns at the same time....