Ask Experts Questions for FREE Help !
Ask
    lhawks's Avatar
    lhawks Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 7, 2007, 09:24 PM
    b&s 14hp value
    how do you adjust the value on it it hard to start was told to adjust the value the start and battle was OK please HELP!! 1
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    May 7, 2007, 09:34 PM
    Hi, lhawks!

    I would like to give you an answer to your question. But, unfortunately, I can't. There may be someone on this site who can. But, we seem to get a lot of questions concerning lawn and garden equipment that go unanswered.

    I care about your question being answered. So, I do know a site where topics about lawns, gardens and lawn maintenance machine issues are the specialty. You might like to give it a try. Here is the link.

    Lawn & Garden Tractors Forum - GardenWeb
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

B&S 14HP Model 287707 slow crank starting [ 4 Answers ]

I have a 1992 MTD 1442 riding mower with a B&S 14HP OHV engine MOdel 287707 Type 0153 01 Code 9210214A. It hasn't been starting except with the use of a charger/starter. Engine wouldn't crank but when charger/starter put on it, could get engine started. Now even the charger/starter won't start...

400 amp service with 2-200 amp panels & 320 amp socket [ 6 Answers ]

Hi TK. I am running 400 amp service into my new contruction home. The electric compnay is running a single 400 amp line to the meter. I have to split it to the two panels at that point. You had told me once before that I need a 320 amp meter socket and then run 2-200 amp lines to the separate...

B&S 14HP OHV overhaul questions [ 3 Answers ]

Help Briggsdude, I am in the midst of rebulding a Briggs and stratton model 287707, type 0225 14 HP OHV motor. I can't find an engine manual so I have few questions. 1. Rod torque specs. There are 2 different size bolts 5/16" & maybe 1/4" 2. Head torque pattern 3. middle piston ring (have...

14hp briggs and stratten motor [ 3 Answers ]

Has two wires from under flywheel red and black and two other wires going behind the starter (not the starter wires) how do I use these wires to get this motor running?

Murray 14hp riding mower [ 1 Answers ]

Hello, I've been trying to get my riding mower to work. It has a briggs and straton 14hp engine. It sat for the winter, and obviously battery was dead. I replaced it with a new one and it ran great. I let it sit about 3 hours and the battery didn't have enough juice to start it. The lights were not...

View more questions Search