Ask Experts Questions for FREE Help !
Ask
    rongerald's Avatar
    rongerald Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 21, 2017, 08:58 AM
    Have empire model gwt-25-3 pilot goes out after furnace operation
    Empire model gwt-25-3. Pilot stays lit, raise thermostat and furnace comes on. When temperature reached furnace and pilot turn off.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Oct 21, 2017, 09:45 AM
    It could be anything from a safety switch to a thermocouple, but what you need is a qualified tech to troubleshoot and test your system. Who installed this furnace? How long have you had it? Do you have and know how to use an ohmmeter?

    I can direct you to an owners manual to guide you but a reliable tech is what you need for HANDS on diagnosis.

    https://www.manualslib.com/manual/81...-Gwt-25-3.html

    Parts are to expensive to just change and not get to the problem. Do you have a manual and followed the routine cleaning procedures?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Empire Gas Floor Furnace with thermostat, pilot on won't ignite [ 0 Answers ]

The Furnace was on this morning no problem... it came up to temperature and shut off as usual but when I tried to turn it back on nothing happened. The pilot is still lit but the furnace will not ignite even when set to highest temperature setting? Assume is thermostat but don'[t know how to...

Have Empire Model DV-25-2SG natural gas d-vent furnace. Pilot lights and stays lit w [ 0 Answers ]

Have Empire Model DV-25-2SG natural direct vent furnace. Pilot lights and stays lit when knob turned to ON. However, when raise thermostat temp from Off the main burner appears to light for an instant and then goes out as does the pilot.

Empire furnace pilot goes out when increase thermostat temp [ 15 Answers ]

Have Empire Model DV-25-2SG propane direct vent furnace. Pilot lights and stays lit when knob turned to ON. However, when raise thermostat temp from Off the main burner appears to light for an instant and then goes out as does the pilot. Help. It's colld up here in the mountains. This unit is...

Lighting Empire wall furnace pilot light [ 1 Answers ]

:o, Please help! I have accessed the inside of my Empire wall furnace & understand the instructions on the knob relating to startingg the pilot light. Have lit pilots of water heaters many times. My question simply is: Where is the place to place the match to get ignition? It refers...

Empire Floor Furnace pilot light will not stay lit [ 2 Answers ]

I have an empire floor furnace that the pilot light will not stay lit? Also, is there a location to buy replacement burners? Thanks you Von Mustion

View more questions Search