 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Empire Gas Floor Furnace with thermostat, pilot on won't ignite
The Furnace was on this morning no problem... it came up to temperature and shut off as usual but when I tried to turn it back on nothing happened. The pilot is still lit but the furnace will not ignite even when set to highest temperature setting? Assume is thermostat but don'[t know how to check it.
|
||||
Check out some similar questions!
I have an ARCO Air forced air gas furnace model GHA075NDC. The pilot light stays lit and the fan comes on when I put the thermostat to fan on but the heater will not ignite. I need heat this winter. Please help!!
Have Empire Model DV-25-2SG propane direct vent furnace. Pilot lights and stays lit when knob turned to ON. However, when raise thermostat temp from Off the main burner appears to light for an instant and then goes out as does the pilot. Help. It's colld up here in the mountains. This unit is...
Connected thermostat wires but empire floor furnace burner still won't ignite.
Do you know where I might be able to find some old cone burners for a gas floor furnace that is @ 40 years old>[email protected]
I have an empire floor furnace that the pilot light will not stay lit? Also, is there a location to buy replacement burners? Thanks you Von Mustion
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
