Ask Experts Questions for FREE Help !
Ask
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #1

    Apr 29, 2017, 09:58 AM
    Husqvarna Model Yth20K46
    It was running fine and then just quit. It's full of gas, getting gas to the carb and will crank on ether for a few seconds but then goes dead. Any ideas?
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #2

    Apr 29, 2017, 11:38 AM
    Problem solved
    Never mind. Water in the gas was the problem. Running well now.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I went to start my Husqvarna YTH20K46 and got nothing , nothing at all [ 1 Answers ]

I went to start my Husqvarna YTH20K46 and got nothing , nothing at all. I turn the key and get nothing, I try to adjust the throttle, still no sound from anywhere. The blade engagement handle is down. Like always when I finished cutting grass last week I turn the mower off and get a backfire,...

Husqvarna YTH2348 [ 1 Answers ]

I have a Husqvarna YTH 2348 riding mower with a Kohler engine. When I turn the throttle up the engine dies. What could the problem be?

Husqvarna Problems [ 1 Answers ]

I have a husqvarna model YTH 2348 lawn tractor with a Briggs 23 hp INTEK engine. It ran fine at last use and one week later when started it was popping back thur the carb on one cyl. It has 160 # compression on both cyl,s.(It does not pop when both spark plugs are removed) It has good spark. It...

Husqvarna LGT2654 Engine Briggs Model No. 445877 [ 5 Answers ]

Engine lost power then wouldn't start. Serviced Engine but still no start. I had trouble when it was brand new and it did this, Repair Facility said it had stuck valves and I needed to use better gas. Now I get clean High Octane. But my Wife said that she bought Regular last time. So I took the...

Lawn tractor problems/Husqvarna model#LOGTH2448T [ 2 Answers ]

Have two issues: 1. Battery won't stay/hold a charge. What recharges the battery? 2. While running with PTO engaged the blades quit cutting. Engine runs fine. Thanks-RTF

View more questions Search