Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
can a fixed range find the range the meter will use to measure the circuit values
[ 2 Answers ]
Some meters have "fixed" range buttons which allow the user to designate the range the meter will use to measure the circuit values.
Reattaching gas line to range
[ 3 Answers ]
When I reattached a flex gas line to my range, the gas shoots straight up out of the orifices, but doesn't disburse through the fixture intended to spread the flames out over the burner area. The electronic igniters spark, but they don't ignite the gas. When turned from "ignite" to "High", the...
Flex Connector for gas range is too big for the gas supply line
[ 3 Answers ]
Got a new gas range. The old range had a yellow gas flex connector and fit perfectly on the brass flare end of the supply pipe, but the new steel connector is too big for the flare end fitting of the gas supply pipe, although just right for connecting to the range. The house was built in 1957, and...
Ground wire to Gas Meter/Line?
[ 3 Answers ]
I live in Pasadena, California. We are installing a 200 amp Electrical Panel between a friend and I, he has more knowledge of electrical wiring than I do but he told me that we were going to install two copper grounding rods six feet apart near the box and run a line to the water main and another...
Connection to gas range gas line too large for gas line intake valve
[ 2 Answers ]
Connection to gas range gas line too large for gas line intake valve. How can I step the range back line down a step. Is there some kind of converter I can buy? View more questions Search
|