Kitchen aid dishwasher trouble shoot

LDawn Rogers Posts: 1, Reputation: 1

New Member

Jan 18, 2016, 03:46 PM

Kitchen aid dishwasher trouble shoot

Washer won't work. Rinse only and the candle/drain buttons flashing. Help

ma0641 Posts: 15,675, Reputation: 1012

Uber Member

Jan 18, 2016, 08:09 PM

What is a "candle/drain" button. Tell us what happens when you load and try to start.

Add your answer here.

Check out some similar questions!

Kitchen Aid Dishwasher blinking lights [ 18 Answers ]

I currently have a Kitchen Aid Dishwasher with the rinse only cancel lights blinking with no responses from the touch panel. What I did was recycle the power, tried to put it in diagnostic and no thing happened. Need some help?

Kitchen aid dishwasher [ 0 Answers ]

Hi, my kitchen aid dishwasher mdb6600aww has rapidly blinking cancel and normal wash lights. I tried the heat dry/high temp scrub button sequence with no reaction... Is there any thing else I can try? Thank you!

Noisy kitchen aid dishwasher [ 1 Answers ]

My elderly father-in-law has a very old Kitchen Aid dishwasher that has been used almost daily for over 25 years. It has started making a noice in the motor area, perhaps like worn bearings. This model has replaceable wooden door panels and the newer models don't accommodate the same size panels...

Kitchen aid dishwasher trouble [ 0 Answers ]

My Kitchen aid dishwasher (which has been horrible from day 1) does not clean the top rack. I can not get the arm under the rack to spin. I have taken it apart and flush it out and it seems to be clean. It connects into the feed tube fine, any help would be great Thanks shulta44

Trouble shoot jet tech f-18DP dishwasher [ 2 Answers ]

Hello my name is david i am trying to trouble shoot a jet tech dish washer with no book on it and no drawings. I have power on my power button no light on my ready light but i do have 120 vac on one side of this light that is not on and 52vac on the other side my start button has 120 vac on both...