Ask Experts Questions for FREE Help !
Ask
    Marc Goulet's Avatar
    Marc Goulet Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jan 5, 2016, 09:41 PM
    Gram prix 5hp snow blower
    I need to find out exactly what size belt I need for the blades. I think the one I have is too far gone to get an accurate measurement. Can anybody help me out with that?
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jan 6, 2016, 04:26 AM
    Do you know your model number? That's how you find the belt that fits your blower.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #3

    Jan 6, 2016, 02:19 PM
    Sure we can help, as soon as you get us a model number and the corrected name of your blower. BTW belts stretch very little and you normally can adjust the tension.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman 22/5HP snow blower [ 4 Answers ]

Hi, I purchase and older model (1997) Craftsman 22' 5 HP dual stage snow blower, and I have not operated one before, but needed to have one to do driveway. Now my first time operating was yesterday after 6" to 8" snow storm. I was being very careful and set RPM's low, just above the TURTLE, and...

Craftsman 5.5hp snow blower won't start [ 10 Answers ]

I tried to start my Craftsman snowblower and it won't kick in. When I prime it it runs a few seconds then shuts down. The longer I prime, the longer it runs. Sounds like it is just running gas that I prime. I have electric start. My snowblower is a little over a year old. I used it last year....

Craftsman model#31A-3BDE799 Snow Blower 5.5hp [ 8 Answers ]

The snowblower is two years old and when the bar to engage the auger is held down the auger will not rotate. Any ideas?

Craftsman 5.5hp snow blower won't start [ 1 Answers ]

Craftsman 5.5hp snow blower won't start. I have confirmed that my carb is plugged. I am pretty handy good instructions should get me through repairing.

Craftsman snow blower 5.5hp loses power [ 3 Answers ]

Today after 15 minutes of use, the engine revved for about 20 seconds, it then settled back to normal, however after that, when I engage the auger and try to throw snow, it loses power and barely throws the snow two to three feet. The auger is working. The machine has only been used three times. I...

View more questions Search