 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hi, I purchase and older model (1997) Craftsman 22' 5 HP dual stage snow blower, and I have not operated one before, but needed to have one to do driveway. Now my first time operating was yesterday after 6" to 8" snow storm. I was being very careful and set RPM's low, just above the TURTLE, and...
I tried to start my Craftsman snowblower and it won't kick in. When I prime it it runs a few seconds then shuts down. The longer I prime, the longer it runs. Sounds like it is just running gas that I prime. I have electric start. My snowblower is a little over a year old. I used it last year....
The snowblower is two years old and when the bar to engage the auger is held down the auger will not rotate. Any ideas?
Today after 15 minutes of use, the engine revved for about 20 seconds, it then settled back to normal, however after that, when I engage the auger and try to throw snow, it loses power and barely throws the snow two to three feet. The auger is working. The machine has only been used three times. I...
Anybody know how to start a Older (5-10 yrs) craftsman 5hp leaf blower/chipper? It has a primer, but not sure where to put throttle and how many times to push primer. Or what to do first. I can usually start it, but that's after I flood it and walk away pissed off. Then come back and sometimes...
View more questions Search
|
