Ask Experts Questions for FREE Help !
Ask
    Fernando Marron's Avatar
    Fernando Marron Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 12, 2015, 05:40 PM
    Increasing Bryant 310AAV/Jav blower speed.
    We recently purchased a Bryant 310AAV/JAV furnace because our old no name unit went out. We've noticed that on hot days the unit isn't able to keep up with the temperature we have selected in the thermostat. We bought this unit because it was comparable to our old one. However it looks like this one is having more trouble bringing the temp down. The compressor is working normally and also freon is fine. We are wondering if we need to adjust the default blower speed and if this will help. Not sure how to do that. Any suggestions? The owners manual is a bit confusing to read.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 12, 2015, 06:25 PM
    How recent, warranty on parts is 5 years? Did the company installing size the unit for your home? Try first removing your filter completely to see if the temp improves.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant model 310aav/jav [ 1 Answers ]

I have an 8 years old Bryant model 310AAV/JAV and is not heating. I hear it running but the burners are not activating and I see a RED light blinking.

Bryant 310AAV/JAV Furnace Codes 14 then 34 [ 0 Answers ]

After considerable money and a lot of work, we were just ready to start showing my deceased mother's home, and now this: The Bryant 310AAV/JAV furnace will start, run for a couple of minutes and then shut down. It will do that again when power is disconnected and reconnected. The trouble codes...

How do I manually reset my Bryant model 310aav/jav furnace? [ 0 Answers ]

I am getting a #33 code indicating a limit circuit fault and am unsure what to do. Any help would be fantastic. I can't afford service now and the kids are cold as the nights are getting colder.

Bryant 310aav/jav code 34 [ 1 Answers ]

We have a Bryant 310AAV/JAV furnace will start up, but will not heat. There is no flame, but you can smell gas. The codes are first 14 then 34. We are without heat and have no clue what to do. Please help

Bryant furnace model 310AAV/JAV blower runs continue [ 0 Answers ]

Bryant furnace model 310AAV/JAV the blow run continue. Even disconnected from the thermostat

View more questions Search