Ask Experts Questions for FREE Help !
Ask
    aceiscold's Avatar
    aceiscold Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 20, 2011, 05:48 AM
    Bryant model 310aav/jav
    I have an 8 years old Bryant model 310AAV/JAV and is not heating. I hear it running but the burners are not activating and I see a RED light blinking.
    shopping72's Avatar
    shopping72 Posts: 1, Reputation: 1
    New Member
    		  
    #2

    Jul 27, 2013, 11:14 AM
    I have a Bryant Model 310AAV/JAV. Furnace and AC are working properly. However, air flow is only going to upstairs. There is no air going through downstairs ducting. Is there a damper or something that controls airflow to downstairs ducting?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant 310aav/jav code 34 [ 1 Answers ]

We have a Bryant 310AAV/JAV furnace will start up, but will not heat. There is no flame, but you can smell gas. The codes are first 14 then 34. We are without heat and have no clue what to do. Please help

Bryant furnace model 310AAV/JAV blower runs continue [ 0 Answers ]

Bryant furnace model 310AAV/JAV the blow run continue. Even disconnected from the thermostat

Bryant air conditioning unit 310AAV/JAV blowing warm air? [ 1 Answers ]

The unit is 2yrs old. Also it has been turned off for two weeks. Checked the filter, very dirty, but a new one in. Still warm air only.

Bryant furnace model 310 AAV/JAV [ 3 Answers ]

Thought the thermostat was bad so replaced the thermostat, sounds like it clicks on but not blowing of the air, and the red light still blinks 2 shorts 4 longs, pilot light also won't come on now. Have done the swith where you turn it off for 5 minutes, still trying to troubleshoot, could use...

Bryant gas heater model beginning 310aav [ 3 Answers ]

I had not used my furnace over the summer. Before turning on the thermostat, I replaced the filter and checked to make sure red light was on solid. Turned on thermostat and furnace light started blinking error code 23, which according to list on furnace means pressure switch obstructed or off. I...

View more questions Search