Ask Experts Questions for FREE Help !
Ask
    TonyP57's Avatar
    TonyP57 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 19, 2010, 12:31 PM
    Bryant furnace model 310AAV/JAV blower runs continue
    Bryant furnace model 310AAV/JAV the blow run continue. Even disconnected from the thermostat

Check out some similar questions!

Bryant 310aav/jav code 34 [ 1 Answers ]

We have a Bryant 310AAV/JAV furnace will start up, but will not heat. There is no flame, but you can smell gas. The codes are first 14 then 34. We are without heat and have no clue what to do. Please help

Bryant air conditioning unit 310AAV/JAV blowing warm air? [ 1 Answers ]

The unit is 2yrs old. Also it has been turned off for two weeks. Checked the filter, very dirty, but a new one in. Still warm air only.

Bryant 310aav furnace, the blower motor not working at full capacity [ 1 Answers ]

I have a Bryant 310aav furnace that recently quit blowing any air into the house, when I checked the furnace I noticed that the blower motor wasn't operating at full capacity. I also noticed that when the furnace would kick on it was way quieter in the house at the intake than normal, so I went...

Bryant furnace model 310 AAV/JAV [ 3 Answers ]

Thought the thermostat was bad so replaced the thermostat, sounds like it clicks on but not blowing of the air, and the red light still blinks 2 shorts 4 longs, pilot light also won't come on now. Have done the swith where you turn it off for 5 minutes, still trying to troubleshoot, could use...

Bryant gas heater model beginning 310aav [ 3 Answers ]

I had not used my furnace over the summer. Before turning on the thermostat, I replaced the filter and checked to make sure red light was on solid. Turned on thermostat and furnace light started blinking error code 23, which according to list on furnace means pressure switch obstructed or off. I...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.