Ask Experts Questions for FREE Help !
Ask
    Nikdawg's Avatar
    Nikdawg Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 23, 2015, 07:03 PM
    Goodman furnace
    My goodman furnace won't start no heat or air blowing out vent
    parttime's Avatar
    parttime Posts: 1,440, Reputation: 113
    Ultra Member
     
    #2

    Jun 24, 2015, 03:23 AM
    Hi Nikdawg and welcome, have you checked the breaker or fuse? Also post model # and a little more info will help the experts give a better answer. Good luck
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #3

    Jun 24, 2015, 11:31 AM
    Power to unit? Battery OK in thermostat? Does thermostat read?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GMH8 goodman furnace won't stay lit. The furnace lights for about 2 seconds [ 2 Answers ]

I have a Goodman Furnace GMH8 that is 4 years old and has been working fine but today it will not stay lit. The furnace lights for about 2 seconds and then goes out. The blower comes on and will continue to run as the furnace lights and then goes out several times before shutting off.

Goodman furnace with 3 blinking lights and furnace has flame roll back [ 7 Answers ]

I have a GMNT-080-4B Some times I get a 3 blink light issue and then when it starts it has a flame roll back. Also I have to change the ignitor every year. Any help would be great

My Goodman GMP050 furnace's igniter won't shut off after the furnace cycles. Why? [ 0 Answers ]

On my 15 yr old Goodman GMP050, the preigniter stays hot orange even after the furnace cycles properly. I've sanded the flame sensor and the igniter but it still stays on till I shut off the electricity at the furnace. Any thoughts? It's COOOOOOLLLLLLDDDDDDDDD!

Goodman furnace [ 5 Answers ]

Compressor kicks on blower kicks on but blower will go off and on ervery few minutes and lets the charge line freeze up and thaw.

Goodman furnace GMNT080-4 furnace runs good for a while then has to be manually reset [ 5 Answers ]

I have a Goodman GMNT080-4 (90%). I'm having the same problem As Streatherg did back in the Nov 2006 question. I reviewed his article and tried Every thing on there but seems to be doing the same thing. The furnace kicks on for about an hour then locks out and has to be manually reset threw...


View more questions Search