Check out some similar questions!

steven1971 · Apr 30, 2015, 01:51 PM

Hello all. I have a kitchen faucet (single handle) that has the numbers 413763 located at the back of the spout assembly. I would like to change just the spout assembly but do not know the manufacturer. I tried searching online but can not find it. Can someone provide some help?

massplumber2008 · Apr 30, 2015, 03:06 PM

Hi Steven

Post a picture to the site... we'll see what we can do after that!

Mark

afaroo · Apr 30, 2015, 08:30 PM

Yep I agree with Mark a picture will help, Thanks.

John

steven1971 · May 1, 2015, 11:03 AM

Originally Posted by massplumber2008

Hi Steven

Post a picture to the site... we'll see what we can do after that!

Mark

Thanks you guys. Please see pic. Any help would be appreciated.

afaroo · May 1, 2015, 05:04 PM

Hello Steven,

It looks like an old Moen faucet, to remove the spout you need to remove the small plastic plug you will see a set screw inside remove the set screw remove the handle and the parts under the handle now you will be able to remove the spout, make sure you close the angle valves under the sink, also I will suggest to call Moen at 800-289-6636, explain your problem also tell them that you are the original owner, thy will send you a new spout if they have it, if they don't have or it doesn't exist any more send you a new faucet assembly with instructions for free, Moen parts have life time warranty, Good luck.

John

ma0641 · May 1, 2015, 07:20 PM

I'd go for a whole replacement.

Milo Dolezal · May 1, 2015, 08:00 PM

I would suggest you replace the whole faucet.

Milo

afaroo · May 1, 2015, 11:13 PM

I am with all the experts to replace the whole faucet, but it will not hurt to call Moen they will advise you what to do I am sure they will send you a replacement faucet if this faucet is obsolete I have experience with Moen on several occasion, good luck.

John

afaroo · May 2, 2015, 11:27 AM

Hello Steven,

FYI I called Moen and they asked me to send the picture I did when I was on the phone they told me it is not Moen product it may be either Delta or Peerless please call them, Delta at 1-800-345-3358 and Peerless at 1-800-438-6673, Good luck.

John

smoothy · May 2, 2015, 11:43 AM

A complete new one might not cost more or much more... and that base if not replaced might begin corroding before the rest is worn out.

Milo Dolezal · May 2, 2015, 06:43 PM

I agree with Afaroo: Yes, there is a chance Moen will send out a brand new replacement faucet. Yes, try to call Moen first.

Milo

afaroo · May 3, 2015, 12:41 PM

Hello All please read post #9 which I contacted Moen and their respond, Thanks.

John

steven1971 · May 7, 2015, 12:56 PM

Hi John,Thank you so much for your comments and even taking the time to contact Moen. You are such a nice person. I really appreciate it. I was a little busy lately but am currently communicating with Peerless/Delta (I think they combined companies or something) to resolve this issue. Take care,Steven

Hi all,

Thanks to everyone for all your comments and help.

Steven