Ask Experts Questions for FREE Help !
Ask
    Fred Garduno's Avatar
    Fred Garduno Posts: 1, Reputation: 1
    New Member
     
    #1

    Mar 31, 2015, 10:03 PM
    Altura 68" Ceiling Fan Very Slow
    When I installed the fan I tested my wiring and the fan seemed to be operating at normal high through low speeds but once I added the blades the fan seems to only operate in very low speed. It does reverse and shut off but when I go from medium to high it starts like it's going to speed up but then slows back to low. I bought 2 of these fans and switched the control module but still same results. Help please!!

Check out some similar questions!

Hampton Bay 68" Altura ceiling fan does not reverse [ 26 Answers ]

New Altura ceiling fan does not reverse with remote. No pull chains since it is 20ft high ceiling. Changed settings on housing and remote but still doesn't reverse. Any ideas:confused:

Hampton Bay 68" altura ceiling fan runs slow [ 40 Answers ]

I just purchased a hampton bay 68" altura ceiling fan Even on high speed it turns slowly. There is a difference between speeds 1 , 2 and 3 but not much. High would be like between 1 and 2 speeds and of 50 " fan.

Where can I purchase a downrod for a 68" hampton bay altura ceiling fan? [ 3 Answers ]

I have 20 foot ceilings in my great room and just purchased the 68 inch hampton bay ceiling fan. I am n need of a downrod, preferably a 48" to 60" I'm thinking. I need your suggestions on that. I have an installer coming on Tuesday, 6/14/11 and would like to have the rod by then. I would need a...

ALTURA 68" ceiling fan [ 2 Answers ]

Hey, My name is rya and I recently installed a new ceiling fan and I cannot get it to go into reverse, I tried everything, any help would be appreciated. It is a Hampton Bay- 68" Altura ceiling fan from home depot, and the SKU# is 904-384


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.