Ask Experts Questions for FREE Help !
Ask
    MisterMoorlands's Avatar
    MisterMoorlands Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Feb 12, 2015, 04:33 PM
    Worchester Greenstar 30si boiler
    I have a Worchester Greenstar 30si boiler. I am trying to re-pressurize it: I have put in the charging key, turned it to the locked position and turned the adjacent water valve. No water appears to be going in as there is no rise in pressure or sound of water entering the system.

    Without the key inserted, water comes out when the valve is turned so water is present.

    Any help would be appreciated.
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Feb 12, 2015, 05:18 PM
    Did you try venting your system? Try that after you engage and turn your key. See if that helps and let me know.
    MisterMoorlands's Avatar
    MisterMoorlands Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Feb 13, 2015, 12:18 PM
    Thank you for your reply. I have vented the radiators and some air was released. When I tried to re-pressurize the boiler, it sounded like some water was going in initially and then it stopped.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

The back boiler from our solid fuel boiler is not heating the water in the cylinder [ 0 Answers ]

Our back boiler heats the water via the open fire. Lately the water is slow to heat in the cylinder and the pipes leading into the tank are extremely hot but the cylinder eventually heats but totally to the bottom of the tank. Would the back boiler be leaking or just full of gunge from 19 years of...

Leaking water from greenstar junior after refilling [ 0 Answers ]

I filled the boiler as the pressure was low but went a bit far the pressure is now showing 3 (but still in the green) he boiler is dripping inside and outside from the overflow pipe is there a way I can reduce the pressure??

Worchester plate with good luck cats pattern [ 0 Answers ]

I have a single plate of a Worchester plate with good luck cats pattern. Is it part of a set or a stand alone plate? I have tried searching the web for Worchester cat plates but it's mostly the big plates with a single cat or a pair of cats. Mine is actually a small saucer. Can someone please tell...

Spark ignition gas boiler Weil McLain pilot lights but boiler doesn't s [ 2 Answers ]

Spark ignition gas boiler. Weil McLain gas boiler. The pilot lights but the boiler doesn't start.

Is my hobart 600 a steam boiler or a hot water boiler. There is no circulator pump [ 0 Answers ]

I have a Hobart 600 automatic gas fired furnace. The first thing is I cannot see a circulater pump or a air tank. I can not tell if it is steam or hot water. When I go to fill the system with water, the system fills and then the water continues to flow out to the drain pipe.

View more questions Search