Ask Experts Questions for FREE Help !
Ask
    JBofTampaBay's Avatar
    JBofTampaBay Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 24, 2015, 01:05 PM
    KitchenAid Dryer will not heat in Electronic Sensor Dry mode...
    I have a KitichenAid Dryer Model KEYS850JQ0. It does NOT heat at all on the Electronic Sensor Dry (Auto) setting - just stays cool - and tumbles. Started a few weeks ago noticed it was not completely drying the clothes.

    Now if you go over to the "Timed Setting" - it heats up and tumbles fine. S

    Suggestions?

    Thanks
    JB
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Jan 28, 2015, 03:46 PM
    These driers will do that when the lint builds up like concrete on the inside of the air ducts. You need to totally tear it down and scrape out and wash all of the parts except the motor, which you vacuum out. You can go to YouTube to see videos on how to take it apart, but do a very good job or it will fail again quickly. I would get a new belt and change it while you have it apart and get some white lithium grease and grease any bearings you find. You need to clean out a drier every two years, at least, according to the manual. All sensors work together by comparing temperature, so all need to be cleaned. You just unplug the wires from the sensors and remove ductwork that they are attached on and clean the entire thing with soap and water. Make sure you go all through the dryer and get all parts like the blower fan and housing, vacuum out motor well and clean exhaust. The dryer uses information from sensors to turn on elements and will not work when dirty.
    Manuals: https://dl.dropboxusercontent.com/u/...le%20Dryer.pdf
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...20Handbook.pdf
    https://dl.dropboxusercontent.com/u/...l%20Dryers.zip (About the same.)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Maytag Dryer does not dry in Auto Dry mode [ 23 Answers ]

My Maytag dryer works well in the Timed Dry mode but in the Auto Dry mode it runs forever and does not dry well. In the Timed Dry mode it produces plenty of heat and works fine. What is happening in the Auto Dry mode that does not make the heat properly get to a level that allows the clothes to...

Dryer does not heat in auto dry mode. [ 4 Answers ]

My question was asked very succinctly here: https://www.askmehelpdesk.com/appliances/maytag-dryer-does-not-dry-auto-dry-mode-24630.html The answer(s) provided ignored the fact that the dryer works fine in timed mode. The dryer does not work well ( slow to dry clothes ) in auto dry mode. ...

Gas Dryer won't dry in auto mode [ 1 Answers ]

I have an Amana Gas Dryer (PLG8409W2) which will not stay hot. In the Auto Dry mode the following ocurrs: The igniter will glow and the gas will flow and ignite. After a while (depending on the load) the flame will go out, it might then glow and ignite the gas flow again. At some point the...

Maytag dryer not working in auto dry mode [ 1 Answers ]

Have a circa-1998 Maytag gas dryer (model LDG8410AAW). After cleaning out exhaust vent thoroughly (as well as replacing belt), having problem where the auto dry mode is not working on the timer (the other timed mode, however, does work). Should I replace the timer, or is there a sensor that needs...


View more questions Search