 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
C wire on old Rheem furnace?
Is it possible to add a Common wire to an old furnace? I have a Rheem RGAA-125C furnace, along with AC, and don't see a Common terminal on the unit. My new thermostat seems to require it, wondering if a Common can be added. I do have extra wires (including blue) available at the thermostat. Any suggestions? Thank you very much -
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
replacing old rheem with new honeywell. old wiring is green, red, blue, yellow, w2 screwtrapped to e screw and tan to x screw. new thermosat has L, Aux/E, G, R/C, O/B, Y, R/C? how do they exchange? This is a heat pump.
I have an old Rheem gas furnace which doesn't power on. I opened up the unit and found what looks like a wire that has been disconnected. Can anyone tell me where this should be plugged back in (if at all?) Pic of what I'm talking about The disconnected wire is red and below where...
I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...
I have the following information. I have a Yellow wire to Y terminal Orange to B terminal Blue to C terminal Red to R...
I am going from a Rheem to a Hunter and need to know where each wire goes. I have hooked the yellow wire to y/o, the green wire to g, and white to w/b. I have three wires left and they are red, tan, and orange. I need to know where the rest of these go. I also have a blue and black wire but...
View more questions Search
|
