 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I'm trying to wire my new (Honeywell 7500) thermostat to Rheem furnace
I have the following information. I have a Yellow wire to Y terminal
Orange to B terminal Blue to C terminal Red to R terminal This is the connection on the circuit board on the heat pump out side of the house. I still have a green, white,and black wire left. How should I connect each wire? |
||||
Check out some similar questions!
I am trying to replace a Rheem thermostat with a Honeywell digital RTH7500. The wires I have are: G - green R - red Y - yellow B - white X - brown W2 and E (jumped with a black wire) Can someone help me with the correct wiring? The manual doesn't tell for these wires.
I recently installed a honeywell rth7500 thermostat and am not sure if it is correct. The old thermostat is a GE, not sure how old. I have a heatpump system (Goodman A61-20) I wired it as follows: Old R(red)- new R Old O(orange) - new O/B Old G(green) - new G Old Y(yellow) - new Y Old...
I'm replacing a Rheem thermostat with a Honeywell 6300 for an electric heating/ac unit and I'm having trouble matching up the wire colors. The Rheem thermostat is one of the old ones with the mercury, so the wires aren't labeled only color coded. The Rheem thermostat has a yellow, blue, red,...
I currently have two zones for cooling only and the thermostat wires are red, blue and white. The red is labeled Rc which is easy, the white is labeled W Heat (this doesn't make sense to me) and the blue is labeled cool? What I think I need to do is connect the red to the Rc on the thermostat,...
I have a Honeywell 1 Heat/1Cool thermostat (TH6110D1013) that I would like to use with a Rheem 2 stage gas heat furnace. I think it is possible but would I get the same benefits as having a thermostat with 2 heat/1 cool? Would I just connect the W terminal on the Thermostat to the W2 on the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
