 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hot Water Pump Flow Activation
I have a technical query regarding hot water pumps.
I live in a flat which is now using a Salamander pump. There is a hot water tank on the floor feeding up to a Salamander pump and a cold water tank above that. The Salamander pump is replacing a techflow pump that was in the same position but broke down. We have three hot water outlets, a bathroom tap, shower and kitchen tap. Now the Salamander pump has been installed, upon opening the hot water taps, only a trickle comes out. If we turn on more than one tap, the pump activates. The shower can turn on on its own if we place the shower head on the floor, but when we place it at head height the pump cuts out again. What I understand of this problem is that there is not enough flow coming through the pump in order to keep the flow switch open. Is there anyway to rectify this or improve the flow? |
||||
Check out some similar questions!
Hello I installed a new shower pump today. After completing the installation and turning the water back on, there is no water running from any hot water tap in the house. Do you think I have an airlock? Any other possibilities? I have tried to get rid of the airlock with the 'length of hose'...
This only happens on this one tap. It is a single faucet and the line is shared with a dishwasher. After the hot water runs for about 30 seconds I hear the pipes downstairs and the flow keeps reducing to hardly anything. I guess it's most likely why the dishes are not getting clean as well. No...
In one bathroom the water flow in the sink is very low including the shower. Also the kitchen hot water is very slow but the other bathroom is working great. What's wrong, please help thanks
Had hot water yesterday. Temp overnight was -3 and now no hot water at any tap. The high got up to 26 for a high and still no hot water in the RV. Haven't been using the floor furnace; so thought that might be the culprit; but switched off the small poratbles and let the furnace (both front and...
1. No hot water coming from shower even though there is hot water coming from face basin in same bathroom and throughout the house( moen plumbing) 2. when water heater valve to house is turned off the cold water and hot water from shower does not flow, yet in other faucets throughout the house...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
