 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Igniter glows all the time Evcon mobile home gas furnace
Igniter glows all the time, even when the AC is running. When the furnace is turned on a relay in the control board ( 7956 -19) clicks repeatedly. No codes are shown. After 1 to 2 minutes all seems well except the igniter still glows.
|
||||
Check out some similar questions!
I have a Tempstar furnace model number NUGS050AF01 - Serial # L1893714174 that recently started blowing cold air. The thermostat controls seem to be working because the AC side works fine and the furnace will start it cycle- but something is shutting it down. The draft inducer blower and large fan...
How do you know if the igniter is bad or if the control box isn't activating the igniter. Is it possible to check to lead wires going from the control box to the igniter without taking out the igniter assy. Much thanks to hvac 1000s for your input. I would also like to thank you for helping other...
What is the cooling cfm for this furnace?
GE furnice igniter glows as it should but doesn't ignite the flames what is wrong
We have had to replace the igniter in our furnace at least 4 times in a little over a year. What could be making them burn out? We had two go out in just one weeks time! This was 12-25-07. We had a new one installed late April of this year so it wasn't used that much. We turned the furnace on last...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
